- Product Categories
- Friendly Links
Information Name: | Fuzhou anionic polyacrylamide |
Published: | 2013-07-11 |
Validity: | 30 |
Specifications: | |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | My manufacturers anionic polyacrylamide Features: 1, good water solubility in cold water can be completely dissolved. 2, add a small amount of this product can be greatly flocculation. Generally only add 0.01 ~ 10ppm (0.01 ~ 10g/m3), you can play a full part. 3, while using the product and inorganic flocculants (ferric sulfate, chloride, iron, etc.), can show a greater effect. This series flocculation effect is very strong, because it has: 1, clarify the purification; 2, settlement promoting effect; 3, filtered promoting effect; 4, the thickening effect and other effects. In waste water treatment, sludge dewatering, beneficiation, coal washing, paper, etc., can fully meet the requirements of various fields. Note: 1, the configuration because the concentration of high molecular weight anionic polyacrylamide, strong viscosity, so the ratio of anion concentration standard for 1 ‰ (can be adjusted according to the concentration of effluent turbidity. Turbidity is high, reduce the concentration; turbidity is low, can generally improve their dose, but does not change its concentration is better, or is likely to affect pipeline flow). 2, operation of the dissolving vessel to be dissolved in the ceramic, stainless steel tank for stirring. Since PAM molecular chain in solution is a random coil, the preparation and dissolved in some water-line circle, a coil and a volume large and plump, easily entangled with each other between the coil and the cross-linked with from the outside certain viscosity. If the centrifugal impeller rotating at high speed due to deformation of macromolecular coil structure separated from the middle part, the smaller size, the crosslinking between the coil is damaged, the viscosity decreased, reducing the results. 3, the mixing process PAM molecular chains in solution by shear force will lead to degradation of molecular chains, affect performance, so dilute PAM mixing time should be reduced to minimize the mixing intensity; reduce agitation speed should generally be controlled at 50-250 rev / min, not too fast. With PAM solution, dosing point should be possible to avoid the intense mechanical agitation; delivery PAM solution, the pipeline should be thick, variable head and manifold to be less, the best selection of Mono pump pumps or diaphragm pumps, which do not use centrifugal pump. Packaging and storage: 25Kg woven bag lined with plastic or paper-plastic bag, or according to user requirement. Storage, note heat, moisture, packaging to prevent breakage, dry product will absorb moisture caking long exposed. Stacking shall not exceed 20 layers. Effective storage period is two years. The product size is 20-80 mesh, also based on user requirements. Unit Name: Beijing Open Source Bi Environmental Engineering Co., Ltd. Company Address: Chaoyang District, Zhuang Zi skin Dongba House Village Industrial Zone Zip Code: 100018 Contact: Manager Li Mobile: 15001362482 Tel 010 -57127953 Fax Number: 02 - 82845391 Website: http://www.kbyyaoji.com E-mail: lihongmin2013@163.com |
Admin>>>
You are the 7376 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Open Source Bi Environmental Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 7376 visitor
Copyright © GuangDong ICP No. 10089450, Beijing Open Source Bi Environmental Engineering Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility